Flare and stray light measurements acc. to IEEE 2020-2024
- Over 100,000 lux at the camera
- Low-stray-light collimator design
- Large 50 mm aperture
Flare and stray light measurements acc. to IEEE 2020-2024
- Over 100,000 lux at the camera
- Low-stray-light collimator design
- Large 50 mm aperture
The Flare Light Source Setup: Realistic Sunlight Simulation in the Laboratory
Modern automotive cameras and camera systems for safety-critical applications must deliver reliable image information even under extreme lighting conditions. Direct sunlight or intense directional light sources can cause sensor saturation, lens flare, packaging flare and stray light effects that significantly affect image quality and the evaluation of camera-based systems. For reproducible measurements according to international standards such as IEEE 2020-2024, IEC 62676 and ISO 16505:2015, a powerful, precisely adjustable and collimated light source is required to generate these effects under controlled laboratory conditions.
The Flare Light Source Setup from lightsource.tech combines the LS-WL1 high-brightness light source with a specially designed low-stray-light collimator. The system achieves illuminance levels of over 100,000 lux at the camera position, enabling realistic simulation of direct sunlight under controlled test conditions. Thanks to its precisely adjustable intensity, both saturation effects in modern automotive HDR cameras and reduced, non-saturating test scenarios can be investigated. The large 50 mm aperture enables application-oriented test setups for evaluating flare and stray light effects in automotive cameras, camera-monitor systems and other camera-based safety applications.
We look forward to your enquiry. Call us on:
+49 (0) 551/270765-0
Or by email at:
info@lightsource.tech
Bright as the Sun
Low-stray-light collimator design
Large aperture
Laser-pumped converter phosphor
Low-stray-light collimator design for precise camera testing
- Over 100,000 lux at the camera position
- Low-stray-light design for reproducible measurements
- Large 50 mm aperture for application-oriented camera testing
- Precisely adjustable intensity for variable test scenarios
- Suitable for test setups according to IEEE 2020-2024, IEC 62676 and ISO 16505:2015
With its large 50 mm aperture, the system is also suitable for cameras with larger entrance pupils or front lenses. An illuminance of over 100,000 lux at the camera position enables tests up to the saturation range of modern HDR cameras.
The light intensity can be precisely adapted to the specific measurement task — from maximum sunlight simulation to reduced, controlled flare scenarios. This allows the setup to be flexibly integrated into test setups according to IEEE 2020-2024, IEC 62676 and ISO 16505:2015.
Intelligent light solutions for industry and research
I look forward to your enquiry and will get back to you as soon as possible!
Sylvie Juillet
lightsource.tech
Monochromator-F for fiber-coupled light sources
- Software controlled fiber-to-fiber monochromator
- High light throughput
- Flexible, tunable point light sources
Programmable laser-pumped white light source
- Flexible point light with extremely high luminance
- Light coupling with multimode fibers of 50 µm – 1 mm core diameter
- Stroboscope and trigger mode up to 200 kHz
Monochromatic fiber-coupled LED light sources for many different wavelengths
- LED light sources for 20+ single wavelengths
- Wavelength range from UV to NIR
- Resource-saving through “Green Efficiency”
