Optical fibers with SMA connector
bringing out the maximum in optical performance
- Hoher Öffnungswinkel, NA =0.5
- Hervorragende Transmission 300 – 1200 nm
- Hochwertig verarbeitet, made in Germany
Optical fibers with SMA connector
bringing out the maximum in optical performance
- High aperture angle, NA = 0.5
- Excellent transmission 300 – 1200 nm
- High quality manufacturing, made in Germany
Multimode fibers made in Germany
Our polymer-clad multimode fibers are particularly well suited for our light sources due to their high numerical aperture of 0.5 and bring out the maximum in optical performance. They have excellent trasmission in the wavelength range 300 – 1200nm.
The fibers are equipped with an SMA-905 connector and a heat sink on both sides. A flexible stainless steel protective tube with black plastic sheath reliably protects the fiber from damage.
We look forward to receiving your inquiry at:
+49 (0) 551/270765-0
or by e-mail at:
info@lightsource.tech
Wavelength range
Numerical Aperture
0.5
Internal Transmittance
75 – 99%
Quality
Made in Germany
Product specifications:
Connectors
2x SMA-905 connector with protective cap
Core Diameter
Optional 400, 600 or 1000 μm
Length
1.5 m
Wavelength range
300 nm – 1200 nm
Fiber type
Multimode, fused silica polymer coated
Protective sheath
Mono-Coil from stainless steel with a black plastic sheath
Our optical fibers – perfectly suitable for light sources from lightsource.tech
Our multimode fibers can transport light in a wide angular range and are therefore particularly well suited for our fiber-coupled light sources LS-WL, LS-BB1 and LS-MC1, which offer light with a numerical aperture of 0.5 at the output.
The protective sheath consists of a mono-coil of stainless steel strip with a black plastic sheath and optimally protects the fiber from accidental damage. However, the bend radius should not fall below 43 mm for a short time. A bend radius greater than 86 mm is permitted permanently.
- Conducts light with large angular range, NA = 0.5
- Optimal for LS-WL1, LS-BB1 and LS-MC1
- Protection by stainless steel mono-coil
- Fibers polymer-coated on pure quartz glass
- Core diameters 400, 600 and 1000 µm available
We are looking forward to your inquiry at:
+49 (0) 551/270765-0
or via e-mail at:
info@lightsource.tech
Technical data sheet for our multimode fibers
Monochromator-F
for fiber coupled light sources
- Software controlled fiber-to-fiber monochromator
- High light throughput
- Flexible, tunable point light sources
Programmable laser-pumped white light source
- Flexible point light with extremely high luminance
- Light coupling with multimode fibers of 50 µm – 1 mm core diameter
- Stroboscope and trigger mode up to 200 kHz
Monochromatic fiber-coupled LED light sources for many different wavelengths
- LED light sources for 20+ single wavelengths
- Wavelength range from UV to NIR
- Resource-saving through “Green Efficiency”
Intelligent light solutions for industry and research
We look forward to your enquiry and will get back to you shortly!
Dr. Jan Thirase
lightsource.tech
